EB30HDRT-AM2

Composite/SD-SDI emSFP Converter, Transceiver, MSA, HD-BNC

The video SFP EB30HDRT-AM2 is an NTSC/PAL composite video SFP (emSFP) converter module. This video SFP module is designed to convert SD-SDI signal to composite and composite to SD-SDI signal over 75Ω coaxial cables via HD-BNC connectors. The video SFP module is carefully designed to provide a broadcast quality conversion.

**Available with Non-MSA pinout (Minimum Order Quantity may apply, please contact Embrionix_Sales@riedel.net)
**Available with DIN 1.0/2.3 connectors (Minimum Order Quantity may apply, please contact Embrionix_Sales@riedel.net)

SMPTE ST259-C compliant
HD-BNC connectors (75Ω)
Supported Composite Standards:
• NTSC M, NTSC J, NTSC 4.43
• PAL B/G/H/I/D, PAL M, PAL N, PAL 60
Rx Channel:
• 10-bit Composite to SD-SDI video decoder
• 4x Oversampling (54Mhz)
• Test Pattern Generation
Tx Channel:
• SD-SDI to Composite 10-bit video encoder
• Up to 16x Oversampling (216Mhz)
• Multiple Chroma & Luma filters
• Test Pattern Generation
Control via I2C serial interface including:
• Voltage & Temperature Monitoring
• Module Information
• Analog Status and Control registers
Low Power Consumption - typical 1100mW
Single Supply +3.3V
Mechanical compliant with SFF-8431 & SFF-8432

High-density, 2x independent composite converters
Composite legacy support with SDI MSA video SFP cage
Pathological signal support
Superior jitter management and signal regeneration
Monitoring and diagnostics at the edge of your product via serial communication

EB30HDRT-AM2
Composite/SD-SDI emSFP Converter, Transceiver, MSA, HD-BNC
EB30HDRT-AN2 (Composite/SD-SDI EmSFP Converter, Transceiver, non-MSA, HD-BNC)
EB30CSRT-AM2 (with DIN connectors, MSA)
EB30CSRT-AN2 (with DIN connectors, non-MSA)
------ Related Accessories ------
EB00CA01-xxA
Coaxial Cable Adaptor, 3G-SDI, DIN 1.0/2.3 Plug (M) to BNC Jack (F), Belden 1855A
EB00CA02-xxA
Coaxial Cable Adaptor, 3G-SDI, HD-BNC Plug (M) to BNC Jack (F), Belden 1855A
EB00CA10-xxA
Coaxial Cable Adaptor, 12G-SDI, HD-BNC Plug (M) to BNC Jack (F), Belden 1855A