12G-SDI emSFP+ Optical, Dual Receiver, Non-MSA, PIN

The video SFP (emSFP) EB12LC2R-MN-P-PA is a medium-haul optic video SFP with a wide PIN receiver 1270nm through 1610nm. This SFP is specifically designed to support pathological test patterns. This SFP is designed to receive two SDI signals up to 12G over single mode fiber (9um/125um) via LC connectors. The optical receivers inside are SMPTE compliant video.

• SMPTE ST297, ST2082 compliant
• Supports 12G, 6G, 3G, HD, SD-SDI and DVB-ASI
• Duplex LC connector
• Operating temperature from 0C to +70C
• Sensitivity better than -14 dBm (tested with 12G-SDI color bar signal with EB12LC2T-SN-13D)

  • ST2082/ST2081/ST424/ST292/ST259/ST297 compliant
  • Supports video pathological patterns at all specified rates
  • LC connector type
  • Control via I2C serial interface includes:
  • • Optical power monitoring
  • • Voltage & temperature monitoring
  • • Module information
  • Hot pluggable and Hot removable with cable/fiber plug in
  • Operating temperatures range from 0C to 70C, contact us for Industrial range
  • Single supply +3.3V
  • 58.5mm x 13.4mm x 8.6mm SFP/SFP+ package
  • High-density and future-proof architecture
  • Pathological signal support
  • Superior jitter management and signal regeneration
  • Monitoring and diagnostics at the edge of your product via serial communication
  • Superior link budget performance compares to the ST297 specification
  • Highest optical performance (fiber stub) and lowest defect rate in the market


EB12LC2R-MN-P-PA Block Diagram