EB60LCRT-Mx-P13F

3G-SDI emSFP Optical, Transceiver, [MSA or Non-MSA], Medium-Haul, PIN, FP 1310nm

The video SFP (emSFP) EB60LCRT-Mx-13F is a medium-haul optic video SFP. This SFP is specifically designed to support pathological test patterns. This SFP is designed to transmit one SDI signal (3G/HD/SD-SDI/ASI) over single mode fiber (9um/125um) via LC connectors. The laser driver inside is SMPTE compliant video. This SFP is designed to receive one SDI signal (3G/HD/SD-SDI/ASI) over single mode fiber (9um/125um) via LC connectors. The optical receiver inside is SMPTE compliant video.

  • ST424/ST292/ST259/DVB-ASI/ST297 compliant
  • Supports video pathological patterns at all specified rates
  • LC connector type
  • Equipped with 1310nm Fabry Perot laser
  • Control via I2C serial interface includes:
  • • Optical power monitoring
  • • Voltage & temperature monitoring
  • • Module information
  • Hot pluggable and Hot removable with cable/fiber plug in
  • Operating temperatures range from -25C to +85C
  • Single supply +3.3V
  • 58.5mm x 13.4mm x 8.6mm SFP/SFP+ package
  • High-density and future-proof architecture
  • Pathological signal support
  • Superior jitter management and signal regeneration
  • Monitoring and diagnostics at the edge of your product via serial communication
  • Superior link budget performance compares to the ST297 specification
  • Highest optical performance (fiber stub) and lowest defect rate in the market
  • EB60LCRT-MN-P13F
  • 3G-SDI emSFP Optical, Transceiver, Non-MSA, Medium-Haul, PIN, FP 1310nm
  • EB60LCRT-MM-P13F
  • 3G-SDI emSFP Optical, Transceiver, MSA, Medium-Haul, PIN, FP 1310nm

BLOCK DIAGRAM

EB60LCRT-Mx-P13F Block Diagram