12G-SDI emSFP+ Optical, Transceiver, [MSA or Non-MSA], Medium-Haul, PIN, DFB 1310nm, w/o Patho Support

The video SFP (emSFP) EB12LCRT-Mx-P13D is a short reach optic video SFP. This SFP is equipped with a 1310nm DFB laser for 12G application allowing the best extension ratio in the industry. This SFP is designed to receive one SDI signal (12G/6G/3G/HD/SD-SDI) over single mode fiber (9um/125um) via LC connector.

• SMPTE ST297, ST2081, ST2082, ST424, ST292, ST259 compliant
• Supports 12G, 6G, 3G, HD, SD-SDI and DVB-ASI
• Operating temperature from 0C to +70C
• Sensitivity better than -14 dBm with EB12LCRT-MM-P (tested with 12G-SDI colorbar signal)

*** This part does not support the SDI pathological stress patterns. If pathological signal support is needed, please see EB12LCRT-Mx-P13D-PA

  • ST2082/ST2081/ST424/ST292/ST259/ST297 compliant
  • LC connector type
  • Equipped with 1310nm DFB laser with built-in Isolator
  • Extinction ratio up to 7dB at 12G-SDI
  • Control via I2C serial interface includes:
  • • Optical power monitoring
  • • Voltage & temperature monitoring
  • • Module information
  • Hot pluggable and Hot removable with cable/fiber plug in
  • Operating temperatures range from 0C to 70C, contact us for Industrial range
  • Single supply +3.3V
  • 58.5mm x 13.4mm x 8.6mm SFP/SFP+ package
  • High-density and future-proof architecture
  • Superior jitter management and signal regeneration
  • Monitoring and diagnostics at the edge of your product via serial communication
  • Superior link budget performance following the ST297 specification
  • Highest optical performance (fiber stub) and lowest defect rate in the market
  • EB12LCRT-MN-P13D
  • 12G-SDI emSFP+ Optical, Transceiver, Non-MSA, Medium-Haul, PIN, DFB 1310nm, w/o Patho Support
  • EB12LCRT-MM-P13D
  • 12G-SDI emSFP+ Optical, Transceiver, MSA, Medium-Haul, PIN, DFB 1310nm, w/o Patho Support


EB12LCRT-Mx-P13D Block Diagram