12G-SDI emSFP+ Optical, Single Receiver, [MSA or Non-MSA], PIN, w/o Patho Support

The video SFP EB12LC1R-Mx-P is a medium reach optic video SFP. This SFP is designed to receive one SDI signal (12G/6G/3G/HD/SD-SDI) over single mode fiber (9um/125um) via LC connector.

• SMPTE ST297, ST2081, ST2082, ST424, ST292, ST259 compliant
• Supports 12G, 6G, 3G, HD, SD-SDI and DVB-ASI
• Operating temperature from 0C to +70C
• Sensitivity better than -14 dBm with EB12LC1T-Mx-13D (tested with 12G-SDI colorbar signal)

*** This part does not support the 6G/12G-SDI pathological stress patterns. If pathological signal support is needed, please see EB12LC1R-Mx-P13D-PA

  • ST2082/ST2081/ST424/ST292/ST259/ST297 compliant
  • LC connector type
  • Control via I2C serial interface includes:
  • • Optical power monitoring
  • • Voltage & temperature monitoring
  • • Module information
  • Hot pluggable and Hot removable with cable/fiber plug in
  • Operating temperatures range from 0C to 70C, contact us for Industrial range
  • Single supply +3.3V
  • 58.5mm x 13.4mm x 8.6mm SFP/SFP+ package
  • High-density and future-proof architecture
  • Superior jitter management and signal regeneration
  • Monitoring and diagnostics at the edge of your product via serial communication
  • Superior link budget performance compares to the ST-297 specification
  • Highest optical performance (fiber stub) and lowest defect rate in the market
  • EB12LC1R-MN-P
  • 12G-SDI emSFP+ Optical, Single Receiver, Non-MSA, PIN, w/o Patho Support
  • EB12LC1R-MM-P
  • 12G-SDI emSFP+ Optical, Single Receiver, MSA, PIN, w/o Patho Support


EB12LC1R-Mx-P Block Diagram