EB30CS2R-AN2

CVBS to SDI video SFP (emSFP) converter, dual receiver, NON-MSA, DIN 1.0/2.3

The CVBS emSFP family is designed to decode two composite signals over 75Ω coaxial cables via HD-BNC connectors. The module decodes NTSC/PAL composite inputs and convert them to SD-SDI signal.

  • ST 259M-C Compliant
  • Supported Composite Standards:
  • Supports video pathological patterns for SD-SDI, NTSC M, NTSC J, NTSC 4.43
  • PAL B/G/H/I/D, PAL M, PAL N, PAL 60
  • DIN 1.0/2.3 connectors (75 ohms)
  • Control and monitoring via serial interface includes:
  • - Input signal detection
  • - Voltage and temperature monitoring
  • - Module Information
  • RX Channel:
  • 10-bit Composite to SD-SDI video decoder
  • 4 x Oversampling (54Mhz)
  • Test Pattern Generation
  • Power consumption: typical 1.3 W
  • Single Supply +3.3V
  • 56.6 mm x 13.4 mm x 8.6 mm SFP Package
  • Converts your legacy composite equipment to be SDI ready
  • Saves costs by reducing power consumption and physical space compared to dedicated Composite equipment
  • Highest density of composite gateway available on the market
  • Accepts any I/O type while keeping your system design budget under control
  • Reduces development cost and risk
  • EB30CS2R-AN2
    CVBS to SDI video SFP (emSFP) converter, dual receiver, NON-MSA, DIN 1.0/2.3
  • EB00CA01-03A
    DIN 1.0/2.3 PLUG TO BNC JACK CABLE ADAPTER, 3 inches, 3G/HD/SD/ASI capable
  • EB00CB01-24A
  • EB00MC01-001
    HEX SCREWDRIVER BIT FOR DIN 1.0/2.3 SPANNER NUT
  • em2x2

BLOCK DIAGRAM

EB30CS2R-AN2 Block Diagram